My battery type in mppt controller

hi,

i have mppt controlller its saying to select battery type

i have 185amp (wet) millat brand company 12v battery

what should i select from options?

1) user defined(pc softwarer)

2) GEL

3) NiCD

4) Sealed

5) Vented

please guide , if user define what should i select the parameter ?

Regards

vented should be the option.

even if not, you can simple configure the voltage in user defined.. millat battery says its boost voltage is upto 14.2V,, or what is written on box.. you can input that value..

[quote=“farhan_ds, post:2, topic:21648”]

vented should be the option.

even if not, you can simple configure the voltage in user defined.. millat battery says its boost voltage is upto 14.2V,, or what is written on box.. you can input that value..

[/quote]

its printed cut of voltage is 14.3 volts ..

then use that :)

[quote=“farhan_ds, post:4, topic:21648”]

then use that :)

[/quote]

can u please tell , what will will be bulk and float charge voltage for wet batteries , that are available in Pakistan.....

bulk charge is automatically done.. the float charge value is usually printed on the battery or info is available on the manufacturers site.. some batteries have different float value than others even in same series. in majority cases, the charge controller set on automatic or when a wet/ vented battery option is selected, will do it better .