Fiberhome PTCL Modem configuration (without wifi)


#1

Please post some Fiberhome PTCL Modem configuration with pics because i could not found this from ptcl web.


#2

just go to Advanced setup > Wan . enter vpi/vci for copper 0/103 for onu 8/81 and then follow wizard enter your user pass when prompted. save reboot, all done.


#3

wan > edit PPPoE 0 / 103

just click next steps and put only values where required.

enter vpi and vci either 0/103 or 8/81 depends on line.

next : user id and pass

save reboot.


#4

i have same modem and my line is COPPER but i am using 8/81 values which are for ONU but it works for me and to surprise u more, 0/103 values don't connect me to internet...


#5

[quote=", post:, topic:"]

i have same modem and my line is COPPER but i am using 8/81 values which are for ONU but it works for me and to surprise u more, 0/103 values don’t connect me to internet…
[/quote]

a friend of mine too has this issue…tht his values are 8/81 and he’s on copper…! surprisingly he also gets attainability on his line of 19mbps!


#6

^ lolz yea... i myself get over 15mbps attainability


#7

Thanks dear its working with 0/103 but not 8/81


#8

i have slow speed. what is wrong with my line.

Statistics -- ADSL

Mode: ADSL2+

Type: Interleave

Line Coding: Trellis On

Status: No Defect

Link Power State: L0

Downstream Upstream

SNR Margin (dB): 4.5 16.8

Attenuation (dB): 49.5 28.4

Output Power (dBm): 17.3 12.2

Attainable Rate (Kbps): 1592 822

Rate (Kbps): 1021 253

MSGc (number of bytes in overhead channel message): 65 13

B (number of bytes in Mux Data Frame): 14 3

M (number of Mux Data Frames in FEC Data Frame): 1 16

T (Mux Data Frames over sync bytes): 2 7

R (number of check bytes in FEC Data Frame): 16 16

S (ratio of FEC over PMD Data Frame length): 0.4542 7.8049

L (number of bits in PMD Data Frame): 546 82

D (interleaver depth): 128 8

Delay (msec): 14 15

Super Frames: 658545 663695

Super Frame Errors: 36 0

RS Words: 93513470 1142029

RS Correctable Errors: 2976860 0

RS Uncorrectable Errors: 134 N/A

HEC Errors: 15 1815

OCD Errors: 0 0

LCD Errors: 0 0

Total Cells: 25583621 818335218

Data Cells: 9997054 356867896

Bit Errors: 0 47579

Total ES: 13 3797

Total SES: 0 3777

Total UAS: 21 161773


#9

[quote=", post:, topic:"]

i have slow speed. what is wrong with my line.

Statistics – ADSL

Mode: ADSL2+

Type: Interleave

Line Coding: Trellis On

Status: No Defect

Link Power State: L0

Downstream Upstream

SNR Margin (dB): 4.5 16.8

Attenuation (dB): 49.5 28.4

Output Power (dBm): 17.3 12.2

Attainable Rate (Kbps): 1592 822

Rate (Kbps): 1021 253

[/quote]

Wats not wrong with ur line…get ur line or pair changed by lineman…ur issue is of bad SNR margins…check for any faulty cable or joints…get them removed.


#10

i have complained so many times for this. But every time line man said that "ur line is fine as there is no any kind of noise". Truly there is no any kind of noise in my line.