Is there anyone , who manage to hook Cisco ADSL router with PTCL Broadband,
I have Cisco 2610 Router with WIC-1adsl card on it and trying to use it with PTCL broadband.
I tried the following config but it could not work as main ATM interface does not come up, it stays down down.
no vpdn logging
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
no atm ilmi-keepalive
dsl operating-mode auto
interface ATM0/2.1 point-to-point
pppoe-client dial-pool-number 1
ip address negotiated
ip mtu 1492
ip nat outside
dialer pool 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username email@example.com password xxxx
can any one tell me where I am making the mistake?